Connectors
J1Processor Bus
J2Power (7-34V DC unregulated)
J3Power (5V DC regulated)
J5RS485 / TTL RS232
J6Serial Console/Debug port
J7Digital I/O Ports A and B
J8Serial Port 1
J9Digital I/O Ports C and D
J10 Serial Port 0
J11 Digital I/O Ports E and F
Specifications
Processor 33MHz 186 Compatible Processor
Operating System XDOS(MS/PC DOS 3.3 compatible)
Memory 512K DRAM, 512K Flash
Serial Port 1 RS-232 with 3 handshake lines
Serial Port 2 RS-232 no handshaking or
Serial Console/
Digital I/O 44 Digital I/O
Power Requirements 7 to 34 Volts DC, or 5V DC regulated
Current Consumption 1.8 Watts, typical
Humidity 5 - 90%, non-condensing
Temperature -20 to +85 °C
(106.7mm x 91.4mm)
Processor I/O Pin (PIO 0, PIO 1, PIO 10, PIO 11) Characteristics
Symbol Parameter MIN MAX Units Condition
VIH Input High 2.0 Vcc+0.5 V
VOL Output Low 0.4 V IOL= 6mA
VOH Output High 2.4 V IOH= -6mA
Ports A, B, C, D, E, F
Symbol Parameter MIN MAX Units Condition
VOL Output Low 0.4 V IOL= 8mA
VOH Output High 2.4 V IOH= -4mA
Mating Connectors
Connector Mfg MFG P/N JK micro P/N
J6,J7,J8,J10 (2x5) Molex 22-55-2101
Oupiin 4072-2X05H 28-0030
J9,J11 (2x13) Molex 22-55-2261
Oupiin 4072-2X013H 28-0031
Pins (for 2x5,2x13) Molex 16-02-0096
Oupiin 4072-PIN-T 28-0033
J3 (1x3) Molex 22-01-2031
J5 (1x5) Molex 22-01-2051
Pins (for 1x3,1x5) Molex 08-50-0114
Oupiin 4071-PIN-T 28-0013
Optional Features
32 pin DIP socket to accept an additional
M-Systems DiskOnChip
Peripheral boards for I/O expansion
Serial driver library
Character LCD & Matrix keypad.
Flashlite 186 Technical Information
12228 E Bennett Rd, Grass Valley, CA 95945
Phone (530) 297-6073
Fax (530) 297-6074
© 2016 JK microsystems, Inc. All rights reserved.